[Chilli] coova-chilli on Debian Lenny

[SA R]

First time I reply here, hope this goes in the correct place..

Thanks for the input, I see that I have not been clear. I will try to
clearify more about the set-up:

Internet --- Telsey Modem --- Server --- AP

Telsey modem is where the fibre cabling enters the house.
Server is a computer running Debian Lenny. It has two network interfaces;
eth0 and eth1.
AP is a wireless router, wrt54gl with Tomato firmware.

I am a bit stumped as basic network settings usually isn't that much of a
challenge.

Currently my /etc/network/interfaces on the server is

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet dhcp

auto eth1


When I start chilli with /etc/init.d/chilli start, tun0 is brought up with
ip address 10.1.0.1 as configured.

To make sure I have basic settings correct, how do you recommend setting the
AP (wrt54gl) in this case? WAN=dhcp ? LAN ip=? MODE=Access Point?
Clients will access the AP over wireless.

For once, google hasn't helped my, neither irc #coova. Very glad for the
replies so far.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.coova.org/pipermail/chilli/attachments/20100429/367eff5d/attachment.htm>