[Chilli] Gigabit network card no upload

[Richard REY]

Hi coova users,

In our ALCASAR project, we use coova and we have seen the same problem 
on the coova listening card when it's connected on a Gb switch (the flow 
is very low and a lot of "interupt" messages are written in journalctl). 
The only workaround we have found is to fix the speed and 
autonegociation of the NIC. (ETHTOOL_OPTS='"autoneg off speed 100 duplex 
full"'. The Linux is Mageia2 (kernel 3.4.52).

Rexy


Le 01/11/2013 21:27, Danilo Magat a écrit :
> Hi guys,
>
> I am facing issue on a gigabit network card.
>
> i am having 100mbps adsl line.
>
> setup:
>
> server is having 2  gigabit network card ( eth0 and eth1 ) --- connected
> to PC with gigabit port
>
> chilli_query authorize mac $mac ---> to allow with unlimited bandwidth
>
> now during the testing ... DOWNLOAD is reaching NOT less than 100mbps
> but no value on UPLOAD.
>
> i did some workaround:
>
> on PC with 10/100/1000 network card i set the Speed Duplex on network
> setting into 100Mbps instead of default config which is Auto Negotiation.
>
> With this workaround i am getting a value on upload not more than 20mbps
> which is still less.
>
> while on a pc with 10/100 packet from download is more that 80mbps but
> not more than 100mbps while on upload it is going up to 70 to 80.
>
> *question is why im not able to get an upload on a gigabit card? *
>
> *is there any config require on chilli ? is this something to do with
> the driver on the network card.*
>
> **
>
> *Danny*
>
>
>
> _______________________________________________
> Chilli mailing list
> Chilli at coova.org
> http://lists.coova.org/cgi-bin/mailman/listinfo/chilli
>