[Chilli] coova-chilli 1.3.0 problem with WISPr-Redirection-URL
Sourav
sourav.chakraborty at netcommwireless.com
Mon Oct 7 22:49:58 UTC 2013
Hi David,
Please find the wireshark capture file of the coovachilli
session......after the Access-Accept, there is no Accounting Start msg
that is received at the radius server end.
Warm Regards,
Sourav
On 27/09/13 09:53, Sourav wrote:
> Hi David/All,
> Please find complete logs for the problem mentioned below..Also I'm
> running 1 instance of coovachilli-1.3.0.
>
> Warm Regards,
> Sourav
> On 23/09/13 17:39, Sourav wrote:
>> Also I have changed a single line of ChilliLibrary.js thus --
>> var chilliController <javascript:searchRef('"chilliController"')> = {interval <javascript:searchRef('"interval"')>:30 ,host <javascript:searchRef('"host"')>:"1.0.0.1" ,port <javascript:searchRef('"port"')>:false <javascript:searchRef('"false"')> ,ident <javascript:searchRef('"ident"')>:'00' ,ssl <javascript:searchRef('"ssl"')>:false <javascript:searchRef('"false"')> ,uamService <javascript:searchRef('"uamService"')>:false <javascript:searchRef('"false"')> };
>> to
>> var chilliController <javascript:searchRef('"chilliController"')> = {interval <javascript:searchRef('"interval"')>:60 ,host <javascript:searchRef('"host"')>:"10.1.0.1" ,port <javascript:searchRef('"port"')>:3990 <javascript:searchRef('"false"')> ,ident <javascript:searchRef('"ident"')>:'00' ,ssl <javascript:searchRef('"ssl"')>:false <javascript:searchRef('"false"')> ,uamService <javascript:searchRef('"uamService"')>:false <javascript:searchRef('"false"')> };
>>
>> Warm Regards,
>> Sourav
>>
>> On 23/09/13 15:10, Sourav wrote:
>>> Hi Xabier/All,
>>> Please find attached the hotspotlogin.html that I'm using and also
>>> the screenshot of the browser from where login is
>>> attempted........the attached jpg file shows that login is
>>> happening,but Accounting Start is not sent by coovachilli(to radius
>>> server) ....also please note the URL bar in the jpg file. This might
>>> give you some clue to the issue......"res=notyet" is
>>> seen......shouldn't it be "res=success"? What might have caused this
>>> problem....please help me out on this.
>>>
>>> Warm Regards,
>>> Sourav
>>> On 20/09/13 18:08, Xabier Oneca -- xOneca wrote:
>>>>
>>>> Hello Sourav,
>>>>
>>>> Sorry I have no clue how to fix that.
>>>>
>>>> Maybe it has something to do with 'Acct-Interim-Interval' set too
>>>> low (value must be >=60 and you have 30).
>>>>
>>>> In fact, we only set 'Session-Timeout' and 'Idle-Timeout', so maybe
>>>> you could completely remove the 'Acct-Interim-Interval' response.
>>>>
>>>> If that doesn't work, I don't know what could probably be...
>>>>
>>>> HTH,
>>>> Xabier Oneca_,,_
>>>>
>>>> El 20/09/2013 09:37, "Sourav"
>>>> <sourav.chakraborty at netcommwireless.com
>>>> <mailto:sourav.chakraborty at netcommwireless.com>> escribió:
>>>>
>>>> Hi All,
>>>> I'm still stuck with the problem mentioned below......all the
>>>> info,logs,config etc are mentioned in the mail chain
>>>> below......please let me know what is going wrong here.....this
>>>> is an urgent situation....please help.
>>>>
>>>> Warm Regards,
>>>> Sourav
>>>> On 19/09/13 17:36, Sourav wrote:
>>>>> Hi All,
>>>>> Please help me solve this issue,as I'm totally stuck in this
>>>>> urgent situation........feeling hopeless at the moment not
>>>>> getting any help from anywhere......please help.
>>>>>
>>>>> Warm Regards,
>>>>> Sourav
>>>>> On 17/09/13 17:05, Sourav wrote:
>>>>>> Hi David,
>>>>>> I guess you should take a look at this problem I'm facing as
>>>>>> I'm using chilliController.js and ChilliLibrary.js ....
>>>>>>
>>>>>> In your blog --http://coova.org/node/80 you mentioned that
>>>>>> this is still under development. I'm using coova-chilli
>>>>>> 1.3.0. Is the feature "Any page a login page" not available
>>>>>> in this version?
>>>>>>
>>>>>> I'm seeing Access-Request go to FreeRadius Server and can
>>>>>> also see Access-Accept getting received by coovachilli, but
>>>>>> it does not send out Accounting Start msg to Freeradius after
>>>>>> that. Also further browsing to any site is not possible.
>>>>>>
>>>>>> Warm Regards,
>>>>>> Sourav
>>>>>> On 17/09/13 09:52, Sourav wrote:
>>>>>>> If the uncomment #HS_MACAUTH=on in config file, then
>>>>>>> Accounting Start msg goes to radius server and browsing is
>>>>>>> possible. I want to have the same behaviour for the user/pwd
>>>>>>> authentication using UAM, which is not happening
>>>>>>> now......currently on entering username/pwd on the
>>>>>>> hotspotlogin.html and pressing "connect", Acess-Request goes
>>>>>>> to freeradius server, which replies back with Access-Accept.
>>>>>>> Now coovachilli should handle this Access-Accept(confirmed
>>>>>>> that it received this msg from the logs), and send
>>>>>>> Accounting Start to radius server and the user should be
>>>>>>> able to browse pages on the internet. This is not happening
>>>>>>> at present.
>>>>>>>
>>>>>>> Warm Regards,
>>>>>>> Sourav
>>>>>>> On 16/09/13 18:28, Russell Mike wrote:
>>>>>>>> Hi Sourav,
>>>>>>>>
>>>>>>>> Please excuse if you have already verified. It could be
>>>>>>>> firewall or any other device blocking account. Port
>>>>>>>> 1813/UDP. No ?
>>>>>>>>
>>>>>>>> Thanks / RM --
>>>>>>>>
>>>>>>>> On Mon, Sep 16, 2013 at 8:15 AM, Sourav
>>>>>>>> <sourav.chakraborty at netcommwireless.com
>>>>>>>> <mailto:sourav.chakraborty at netcommwireless.com>> wrote:
>>>>>>>>
>>>>>>>> Hi MIke,
>>>>>>>> Thanks for the suggestion....but the problem seems to
>>>>>>>> be at the coovachilli end and not at the radius server
>>>>>>>> end......coovachilli is not sending out Accounting
>>>>>>>> Start msg to radius server after it receives
>>>>>>>> Access-Accept from the radius server.
>>>>>>>>
>>>>>>>> Warm Regards,
>>>>>>>> Sourav
>>>>>>>>
>>>>>>>> On 16/09/13 17:45, Russell Mike wrote:
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> The following is working one, check if helps.
>>>>>>>>>
>>>>>>>>> server accept_everyone {
>>>>>>>>> authorize {
>>>>>>>>> files
>>>>>>>>> sql
>>>>>>>>> if(ok) {
>>>>>>>>> update control {
>>>>>>>>> Login-Time := 'Any0000-1259'
>>>>>>>>> Auth-Type := "Accept"
>>>>>>>>> }
>>>>>>>>> }
>>>>>>>>> update reply {
>>>>>>>>> WISPr-Redirection-URL := ""
>>>>>>>>> }
>>>>>>>>> else {
>>>>>>>>>
>>>>>>>>> update control {
>>>>>>>>> Auth-Type := "Reject"
>>>>>>>>> }
>>>>>>>>> update reply {
>>>>>>>>> WISPr-Redirection-URL := "http://41.139.28.1"
>>>>>>>>> }
>>>>>>>>> }
>>>>>>>>> }
>>>>>>>>>
>>>>>>>>> Thanks / RM --
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Thu, Sep 12, 2013 at 4:12 AM, Sourav
>>>>>>>>> <sourav.chakraborty at netcommwireless.com
>>>>>>>>> <mailto:sourav.chakraborty at netcommwireless.com>> wrote:
>>>>>>>>>
>>>>>>>>> BTW the radius exchanges look this way --
>>>>>>>>>
>>>>>>>>> rad_recv: Access-Request packet from host
>>>>>>>>> 192.168.1.1 port 39125, id=40, length=287
>>>>>>>>> ChilliSpot-Version = "1.3.0"
>>>>>>>>> User-Name = "hhgk"
>>>>>>>>> CHAP-Challenge = 0x4a82bfa6b164f1171f7aa616439a0c21
>>>>>>>>> CHAP-Password = 0x00db346919de9293942fc6cf7d5014a228
>>>>>>>>> Service-Type = Login-User
>>>>>>>>> Acct-Session-Id = "5231317c00000001"
>>>>>>>>> Framed-IP-Address = 10.1.0.4
>>>>>>>>> NAS-Port-Type = Wireless-802.11
>>>>>>>>> NAS-Port = 1
>>>>>>>>> NAS-Port-Id = "00000001"
>>>>>>>>> Calling-Station-Id = "00-08-CA-46-7D-11"
>>>>>>>>> Called-Station-Id = "00-60-64-89-20-60
>>>>>>>>> <tel:00-60-64-89-20-60>"
>>>>>>>>> NAS-IP-Address = 10.1.0.1
>>>>>>>>> NAS-Identifier = "nas01"
>>>>>>>>> WISPr-Location-ID = "isocc=,cc=,ac=,network=Coova,"
>>>>>>>>> WISPr-Location-Name = "My_HotSpot"
>>>>>>>>> WISPr-Logoff-URL = "http://10.1.0.1:3990/logoff"
>>>>>>>>> <http://10.1.0.1:3990/logoff>
>>>>>>>>> Message-Authenticator =
>>>>>>>>> 0xd50a548a33cf2e0c31d95951ae676f60
>>>>>>>>> # Executing section authorize from file
>>>>>>>>> /usr/local/etc/raddb/sites-enabled/default
>>>>>>>>> +- entering group authorize {...}
>>>>>>>>> ++[preprocess] returns ok
>>>>>>>>> [chap] Setting 'Auth-Type := CHAP'
>>>>>>>>> ++[chap] returns ok
>>>>>>>>> ++[mschap] returns noop
>>>>>>>>> ++[digest] returns noop
>>>>>>>>> [suffix] No '@' in User-Name = "hhgk", looking up
>>>>>>>>> realm NULL
>>>>>>>>> [suffix] No such realm "NULL"
>>>>>>>>> ++[suffix] returns noop
>>>>>>>>> [eap] No EAP-Message, not doing EAP
>>>>>>>>> ++[eap] returns noop
>>>>>>>>> [files] users: Matched entry DEFAULT at line 71
>>>>>>>>> ++[files] returns ok
>>>>>>>>> ++[expiration] returns noop
>>>>>>>>> ++[logintime] returns noop
>>>>>>>>> [pap] WARNING: Auth-Type already set. Not setting
>>>>>>>>> to PAP
>>>>>>>>> ++[pap] returns noop
>>>>>>>>> Found Auth-Type = Accept
>>>>>>>>> Auth-Type = Accept, accepting the user
>>>>>>>>> # Executing section post-auth from file
>>>>>>>>> /usr/local/etc/raddb/sites-enabled/default
>>>>>>>>> +- entering group post-auth {...}
>>>>>>>>> ++[exec] returns noop
>>>>>>>>> Sending Access-Accept of id 40 to 192.168.1.1 port
>>>>>>>>> 39125
>>>>>>>>> Idle-Timeout = 1200
>>>>>>>>> ChilliSpot-Bandwidth-Max-Down = 1024
>>>>>>>>> ChilliSpot-Bandwidth-Max-Up = 512
>>>>>>>>> Session-Timeout = 1800
>>>>>>>>> Acct-Interim-Interval = 30
>>>>>>>>> Finished request 8.
>>>>>>>>> Going to the next request
>>>>>>>>> Waking up in 4.9 seconds.
>>>>>>>>> Cleaning up request 8 ID 40 with timestamp +1041
>>>>>>>>> Ready to process requests.
>>>>>>>>>
>>>>>>>>> Warm Regards,
>>>>>>>>> Sourav
>>>>>>>>>
>>>>>>>>> On 12/09/13 14:02, Sourav wrote:
>>>>>>>>>> Hi,
>>>>>>>>>> I have been sending out SOS for the past 2 days
>>>>>>>>>> ........please help me out as I am stuck and
>>>>>>>>>> cannot progress further without your help.
>>>>>>>>>>
>>>>>>>>>> I have setup coova-chilli 1.3.0 with Freeradius and have set up a
>>>>>>>>>> captive portal page(hotspotlogin.html).
>>>>>>>>>> On trying to login from a PC using Wireless, Radius Access-Request
>>>>>>>>>> reaches Freeradius(which sends Access-Accept as I have set up(in users
>>>>>>>>>> file) --
>>>>>>>>>> DEFAULT Auth-Type := Accept
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> But no RADIUS "Acct-Status-Type=Start" msg is sent by coovachilli after this, redirection
>>>>>>>>>> happens to hotspotlogin.html again, after a while. Further browsing to any site, takes
>>>>>>>>>> me to the captive portal page and not to the site. Please help me
>>>>>>>>>> resolve this as this is urgently required.
>>>>>>>>>>
>>>>>>>>>> Please find logs for the problem which I am
>>>>>>>>>> facing as mentioned in my mail below------please
>>>>>>>>>> help me out on this ....
>>>>>>>>>> dhcp.c: 411: 0 (Debug) dhcp_send() len=54
>>>>>>>>>> dhcp.c: 4965: 0 (Debug) dhcp_decaps:
>>>>>>>>>> src=00:08:ca:46:7d:11 dst=00:60:64:89:20:60 pr
>>>>>>>>>> dhcp.c: 3497: 0 (Debug) function dhcp_receive_ip()
>>>>>>>>>> tun.c: 1089: 0 (Debug) tun_encaps(tun0) len=52
>>>>>>>>>> redir.c: 3278: 0 (Debug) Calling redir_getstate()
>>>>>>>>>> redir.c: 3323: 0 (Debug) Receiving HTTP Request
>>>>>>>>>> redir.c: 2103: 0 (Debug) The path: json/logon
>>>>>>>>>> redir.c: 2118: 0 (Debug) The (json format) path:
>>>>>>>>>> logon
>>>>>>>>>> redir.c: 2153: 0 (Debug) Query string:
>>>>>>>>>> username=hhgk&response=db346919de9293942fc6c
>>>>>>>>>> redir.c: 2175: 0 (Debug) Host: 10.1.0.1:3990
>>>>>>>>>> <http://10.1.0.1:3990>
>>>>>>>>>> redir.c: 2160: 0 (Debug) end of http-request
>>>>>>>>>> redir.c: 1877: 0 (Debug) getparam(&lang=)
>>>>>>>>>> redir.c: 1877: 0 (Debug) getparam(&username=)
>>>>>>>>>> redir.c: 1903: 0 (Debug) The parameter username
>>>>>>>>>> is: [hhgk]
>>>>>>>>>> redir.c: 2267: 0 (Debug) -->> Setting
>>>>>>>>>> username=[hhgk]
>>>>>>>>>> redir.c: 1877: 0 (Debug) getparam(&userurl=)
>>>>>>>>>> redir.c: 1903: 0 (Debug) The parameter userurl
>>>>>>>>>> is: [http://www.telegesis.com/]
>>>>>>>>>> redir.c: 2273: 0 (Debug) -->> Setting
>>>>>>>>>> userurl=[http://www.telegesis.com/]
>>>>>>>>>> redir.c: 1877: 0 (Debug) getparam(&continue=)
>>>>>>>>>> redir.c: 1877: 0 (Debug) getparam(&WISPrVersion=)
>>>>>>>>>> redir.c: 2295: 0 (Debug) using uamprotocol: WISPr
>>>>>>>>>> 1.0 (1)
>>>>>>>>>> redir.c: 1877: 0 (Debug) getparam(&ntresponse=)
>>>>>>>>>> redir.c: 1877: 0 (Debug) getparam(&response=)
>>>>>>>>>> redir.c: 1903: 0 (Debug) The parameter response
>>>>>>>>>> is: [db346919de9293942fc6cf7d5014a2
>>>>>>>>>> redir.c: 1877: 0 (Debug) getparam(&ident=)
>>>>>>>>>> redir.c: 3388: 0 (Debug) Processing HTTP Request
>>>>>>>>>> redir.c: 3696: 0 (Debug) Processing received request
>>>>>>>>>> redir.c: 3794: 0 (Debug) redir_accept: Sending
>>>>>>>>>> RADIUS request
>>>>>>>>>> radius.c: 1315: 0 (Debug) RADIUS client 0.0.0.0:0
>>>>>>>>>> <http://0.0.0.0:0>
>>>>>>>>>> tun.c: 802: 0 (Debug) tun_decaps(idx=0, len=52)
>>>>>>>>>> chilli.c: 2657: 0 (Debug) sending to : 10.1.0.4
>>>>>>>>>> dhcp.c: 5321: 0 (Debug) adding 14 to IP frame
>>>>>>>>>> length 66
>>>>>>>>>> dhcp.c: 411: 0 (Debug) dhcp_send() len=66
>>>>>>>>>> redir.c: 2642: 0 (Debug) created radius packet
>>>>>>>>>> (code=1, id=40, len=33)
>>>>>>>>>>
>>>>>>>>>> redir.c: 2654: 0 (Debug) SECRET: [change-me]
>>>>>>>>>> redir.c: 2803: 0 (Debug) sending radius packet
>>>>>>>>>> (code=1, id=40, len=287)
>>>>>>>>>>
>>>>>>>>>> radius.c: 321: 0 (Debug) Allocating RADIUS packet
>>>>>>>>>> radius.c: 1898: 0 (Debug) Received RADIUS packet
>>>>>>>>>> id=40
>>>>>>>>>> radius.c: 421: 0 (Debug) Freeing RADIUS packet
>>>>>>>>>> radius.c: 426: 0 (Debug) RADIUS queue-out id=40
>>>>>>>>>> idx=0
>>>>>>>>>> redir.c: 2431: 0 (Debug) Received RADIUS response
>>>>>>>>>> chilli.c: 3901: 0 (Debug) Received too small
>>>>>>>>>> radius Acct-Interim-Interval: 30;
>>>>>>>>>> redir.c: 2531: 0 (Debug) +attribute EAP msg (0
>>>>>>>>>> bytes):
>>>>>>>>>> redir.c: 3804: 0 (Debug) Received RADIUS reply
>>>>>>>>>> redir.c: 3818: 0 (Debug) redir_main handling
>>>>>>>>>> Access-Accept
>>>>>>>>>> redir.c: 1877: 0 (Debug) getparam(&callback=)
>>>>>>>>>> redir.c: 1903: 0 (Debug) The parameter callback
>>>>>>>>>> is: [chilliJSON.reply]
>>>>>>>>>> redir.c: 1394: 0 (Debug) sending json:
>>>>>>>>>> chilliJSON.reply({"version":"1.0","*clientSta**te":1*,"redir":{"originalURL":"http://www.telegesis.com/"
>>>>>>>>>> <http://www.telegesis.com/>,"redirectionURL":"","logoutURL":"http://10.1.0.1:3990/logoff"
>>>>>>>>>> <http://10.1.0.1:3990/logoff>,"ipAddress":"10.1.0.4","macAddress":"00-08-CA-46-7D-11"},"session":{"sessionId":"5231317c00000001","userName":"hhgk","startTime":1378955693,"sessionTimeout":1800,"idleTimeout":1200},"accounting":{"sessionTime":0,"idleTime":0,"inputOctets":0,"outputOctets":0,"inputGigawords":0,"outputGigawords":0,"viewPoint":"client"}}
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> redir.c: 1455: 0 (Debug) redir_write(749)
>>>>>>>>>> tun.c: 802: 0 (Debug) tun_decaps(idx=0, len=789)
>>>>>>>>>> chilli.c: 2657: 0 (Debug) sending to : 10.1.0.4
>>>>>>>>>> dhcp.c: 5321: 0 (Debug) adding 14 to IP frame
>>>>>>>>>> length 803
>>>>>>>>>> dhcp.c: 411: 0 (Debug) dhcp_send() len=803
>>>>>>>>>> chilli.c: 5840: 0 (Debug) UAM login with unknown
>>>>>>>>>> IP address: 10.1.0.4
>>>>>>>>>> redir.c: 3854: 0 (Debug) -->> Msg
>>>>>>>>>> userurl=[http://www.telegesis.com/]
>>>>>>>>>>
>>>>>>>>>> redir.c: 3077: 0 (Debug) close_exit
>>>>>>>>>> dhcp.c: 4965: 0 (Debug) dhcp_decaps:
>>>>>>>>>> src=00:08:ca:46:7d:11 dst=00:60:64:89:20:60 pr
>>>>>>>>>> dhcp.c: 3497: 0 (Debug) function dhcp_receive_ip()
>>>>>>>>>> tun.c: 1089: 0 (Debug) tun_encaps(tun0) len=40
>>>>>>>>>> tun.c: 802: 0 (Debug) tun_decaps(idx=0, len=52)
>>>>>>>>>> chilli.c: 2657: 0 (Debug) sending to : 10.1.0.4
>>>>>>>>>> dhcp.c: 5321: 0 (Debug) adding 14 to IP frame
>>>>>>>>>> length 66
>>>>>>>>>> dhcp.c: 411: 0 (Debug) dhcp_send() len=66
>>>>>>>>>> tun.c: 802: 0 (Debug) tun_decaps(idx=0, len=40)
>>>>>>>>>> chilli.c: 2657: 0 (Debug) sending to : 10.1.0.4
>>>>>>>>>> dhcp.c: 5321: 0 (Debug) adding 14 to IP frame
>>>>>>>>>> length 54
>>>>>>>>>> dhcp.c: 411: 0 (Debug) dhcp_send() len=54
>>>>>>>>>> chilli.c: 379: 0 (Debug) caught 17 via selfpipe
>>>>>>>>>> chilli.c: 310: 0 (Debug) child 6326 terminated
>>>>>>>>>> chilli.c: 135: 0 (Debug) Freed child process 6326
>>>>>>>>>> [[redir]]
>>>>>>>>>> dhcp.c: 4965: 0 (Debug) dhcp_decaps:
>>>>>>>>>> src=00:08:ca:46:7d:11 dst=00:60:64:89:20:60 pr
>>>>>>>>>> dhcp.c: 3497: 0 (Debug) function dhcp_receive_ip()
>>>>>>>>>> tun.c: 1089: 0 (Debug) tun_encaps(tun0) len=40
>>>>>>>>>> tun.c: 802: 0 (Debug) tun_decaps(idx=0, len=40)
>>>>>>>>>> chilli.c: 2657: 0 (Debug) sending to : 10.1.0.4
>>>>>>>>>> dhcp.c: 5321: 0 (Debug) adding 14 to IP frame
>>>>>>>>>> length 54
>>>>>>>>>> dhcp.c: 411: 0 (Debug) dhcp_send() len=54
>>>>>>>>>> dhcp.c: 4965: 0 (Debug) dhcp_decaps:
>>>>>>>>>> src=00:08:ca:46:7d:11 dst=00:60:64:89:20:60 pr
>>>>>>>>>> dhcp.c: 3497: 0 (Debug) function dhcp_receive_ip()
>>>>>>>>>> dhcp.c: 2558: 0 (Debug) Resetting connection on
>>>>>>>>>> port 56160->443
>>>>>>>>>> dhcp.c: 411: 0 (Debug) dhcp_send() len=54
>>>>>>>>>> dhcp.c: 3908: 0 (Debug) dropping packet; not nat'ed
>>>>>>>>>> dhcp.c: 4965: 0 (Debug) dhcp_decaps:
>>>>>>>>>> src=00:08:ca:46:7d:11 dst=00:60:64:89:20:60 pr
>>>>>>>>>> dhcp.c: 3497: 0 (Debug) function dhcp_receive_ip()
>>>>>>>>>> dhcp.c: 2558: 0 (Debug) Resetting connection on
>>>>>>>>>> port 56165->443
>>>>>>>>>> dhcp.c: 411: 0 (Debug) dhcp_send() len=54
>>>>>>>>>> dhcp.c: 3908: 0 (Debug) dropping packet; not nat'ed
>>>>>>>>>> tun.c: 802: 0 (Debug) tun_decaps(idx=0, len=52)
>>>>>>>>>> chilli.c: 2657: 0 (Debug) sending to : 10.1.0.4
>>>>>>>>>> dhcp.c: 5321: 0 (Debug) adding 14 to IP frame
>>>>>>>>>> length 66
>>>>>>>>>> dhcp.c: 2674: 0 (Debug) Resetting connection on
>>>>>>>>>> port 443->56160 (undo)
>>>>>>>>>> dhcp.c: 411: 0 (Debug) dhcp_send() len=54
>>>>>>>>>> tun.c: 1089: 0 (Debug) tun_encaps(tun0) len=40
>>>>>>>>>> dhcp.c: 5390: 0 (Debug) dhcp_undoDNAT() returns true
>>>>>>>>>> tun.c: 802: 0 (Debug) tun_decaps(idx=0, len=52)
>>>>>>>>>> chilli.c: 2657: 0 (Debug) sending to : 10.1.0.4
>>>>>>>>>> dhcp.c: 5321: 0 (Debug) adding 14 to IP frame
>>>>>>>>>> length 66
>>>>>>>>>> dhcp.c: 2674: 0 (Debug) Resetting connection on
>>>>>>>>>> port 443->56165 (undo)
>>>>>>>>>> dhcp.c: 411: 0 (Debug) dhcp_send() len=54
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> After a little while --
>>>>>>>>>> dhcp.c: 4965: 0 (Debug) dhcp_decaps:
>>>>>>>>>> src=00:08:ca:46:7d:11 dst=00:60:64:89:20:60 pr
>>>>>>>>>> dhcp.c: 3497: 0 (Debug) function dhcp_receive_ip()
>>>>>>>>>> tun.c: 1089: 0 (Debug) tun_encaps(tun0) len=52
>>>>>>>>>> redir.c: 3278: 0 (Debug) Calling redir_getstate()
>>>>>>>>>> redir.c: 3323: 0 (Debug) Receiving HTTP Request
>>>>>>>>>> redir.c: 2103: 0 (Debug) The path: json/status
>>>>>>>>>> redir.c: 2118: 0 (Debug) The (json format) path:
>>>>>>>>>> status
>>>>>>>>>> redir.c: 2153: 0 (Debug) Query string:
>>>>>>>>>> callback=chilliJSON.reply&0.5259556404780596
>>>>>>>>>> redir.c: 2175: 0 (Debug) Host: 10.1.0.1:3990
>>>>>>>>>> <http://10.1.0.1:3990>
>>>>>>>>>> redir.c: 2160: 0 (Debug) end of http-request
>>>>>>>>>> redir.c: 3388: 0 (Debug) Processing HTTP Request
>>>>>>>>>> redir.c: 3696: 0 (Debug) Processing received request
>>>>>>>>>> redir.c: 1877: 0 (Debug) getparam(&callback=)
>>>>>>>>>> redir.c: 1903: 0 (Debug) The parameter callback
>>>>>>>>>> is: [chilliJSON.reply]
>>>>>>>>>> redir.c: 1394: 0 (Debug) sending json:
>>>>>>>>>> chilliJSON.reply({"version":"1.0","*clientSta**te":0*,"challenge":"00000000000000000000000000000000","location":{"name":"My
>>>>>>>>>> HotSpot"},"redir":{"originalURL":"","redirectionURL":"","logoutURL":"http://10.1.0.1:3990/logoff"
>>>>>>>>>> <http://10.1.0.1:3990/logoff>,"ipAddress":"10.1.0.4","macAddress":"00-08-CA-46-7D-11"}})
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> redir.c: 1455: 0 (Debug) redir_write(542)
>>>>>>>>>> redir.c: 3077: 0 (Debug) close_exit
>>>>>>>>>> tun.c: 802: 0 (Debug) tun_decaps(idx=0, len=40)
>>>>>>>>>> chilli.c: 2657: 0 (Debug) sending to : 10.1.0.4
>>>>>>>>>>
>>>>>>>>>> Warm Regards,
>>>>>>>>>> Sourav
>>>>>>>>>> On 11/09/13 13:10, Sourav wrote:
>>>>>>>>>>> Hi All,
>>>>>>>>>>> I have setup coova-chilli 1.3.0 with Freeradius and have set up a
>>>>>>>>>>> captive portal page(hotspotlogin.html).
>>>>>>>>>>> On trying to login from a PC using Wireless, Radius Access-Request
>>>>>>>>>>> reaches Freeradius(which sends Access-Accept as I have set up(in users
>>>>>>>>>>> file) --
>>>>>>>>>>> DEFAULT Auth-Type := Accept
>>>>>>>>>>> WISPr-Redirection-URL=http://google.com.au
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> But instead of getting redirected togoogle.com.au <http://google.com.au>, the redirection
>>>>>>>>>>> happens to hotspotlogin.html again. Further browsing to any site, takes
>>>>>>>>>>> me to the captive portal page and not to the site. Please help me
>>>>>>>>>>> resolve this as this is urgently required.
>>>>>>>>>>>
>>>>>>>>>>> Thanks
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Warm Regards,
>>>>>>>>>> Sourav
>>>>>>>>>>
>>>>>>>>>> ______________________________________________________________________
>>>>>>>>>> This communication contains information which may
>>>>>>>>>> be confidential or privileged. The information is
>>>>>>>>>> intended solely for the use of the individual or
>>>>>>>>>> entity named above. If you are not the intended
>>>>>>>>>> recipient, be aware that any disclosure, copying,
>>>>>>>>>> distribution or use of the contents of this
>>>>>>>>>> information is prohibited. If you have received
>>>>>>>>>> this communication in error, please notify me by
>>>>>>>>>> telephone immediately.
>>>>>>>>>> ______________________________________________________________________
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Warm Regards,
>>>>>>>>> Sourav
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ______________________________________________________________________
>>>>>>>>> This communication contains information which may
>>>>>>>>> be confidential or privileged. The information is
>>>>>>>>> intended solely for the use of the individual or
>>>>>>>>> entity named above. If you are not the intended
>>>>>>>>> recipient, be aware that any disclosure, copying,
>>>>>>>>> distribution or use of the contents of this
>>>>>>>>> information is prohibited. If you have received
>>>>>>>>> this communication in error, please notify me by
>>>>>>>>> telephone immediately.
>>>>>>>>> ______________________________________________________________________
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Chilli mailing list
>>>>>>>>> Chilli at coova.org <mailto:Chilli at coova.org>
>>>>>>>>> http://lists.coova.org/cgi-bin/mailman/listinfo/chilli
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Warm Regards,
>>>>>>>> Sourav
>>>>>>>>
>>>>>>>>
>>>>>>>> ______________________________________________________________________
>>>>>>>> This communication contains information which may be
>>>>>>>> confidential or privileged. The information is intended
>>>>>>>> solely for the use of the individual or entity named
>>>>>>>> above. If you are not the intended recipient, be aware
>>>>>>>> that any disclosure, copying, distribution or use of
>>>>>>>> the contents of this information is prohibited. If you
>>>>>>>> have received this communication in error, please
>>>>>>>> notify me by telephone immediately.
>>>>>>>> ______________________________________________________________________
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Warm Regards,
>>>>>>> Sourav
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Warm Regards,
>>>>>> Sourav
>>>>>>
>>>>>> ______________________________________________________________________
>>>>>> This communication contains information which may be
>>>>>> confidential or privileged. The information is intended
>>>>>> solely for the use of the individual or entity named above.
>>>>>> If you are not the intended recipient, be aware that any
>>>>>> disclosure, copying, distribution or use of the contents of
>>>>>> this information is prohibited. If you have received this
>>>>>> communication in error, please notify me by telephone
>>>>>> immediately.
>>>>>> ______________________________________________________________________
>>>>>
>>>>>
>>>>> --
>>>>> Warm Regards,
>>>>> Sourav
>>>>>
>>>>> ______________________________________________________________________
>>>>> This communication contains information which may be
>>>>> confidential or privileged. The information is intended solely
>>>>> for the use of the individual or entity named above. If you
>>>>> are not the intended recipient, be aware that any disclosure,
>>>>> copying, distribution or use of the contents of this
>>>>> information is prohibited. If you have received this
>>>>> communication in error, please notify me by telephone immediately.
>>>>> ______________________________________________________________________
>>>>
>>>>
>>>> --
>>>> Warm Regards,
>>>> Sourav
>>>>
>>>>
>>>> ______________________________________________________________________
>>>> This communication contains information which may be
>>>> confidential or privileged. The information is intended solely
>>>> for the use of the individual or entity named above. If you are
>>>> not the intended recipient, be aware that any disclosure,
>>>> copying, distribution or use of the contents of this
>>>> information is prohibited. If you have received this
>>>> communication in error, please notify me by telephone immediately.
>>>> ______________________________________________________________________
>>>>
>>>> _______________________________________________
>>>> Chilli mailing list
>>>> Chilli at coova.org <mailto:Chilli at coova.org>
>>>> http://lists.coova.org/cgi-bin/mailman/listinfo/chilli
>>>>
>>>
>>>
>>> --
>>> Warm Regards,
>>> Sourav
>>>
>>> ______________________________________________________________________
>>> This communication contains information which may be confidential or
>>> privileged. The information is intended solely for the use of the
>>> individual or entity named above. If you are not the intended
>>> recipient, be aware that any disclosure, copying, distribution or
>>> use of the contents of this information is prohibited. If you have
>>> received this communication in error, please notify me by telephone
>>> immediately.
>>> ______________________________________________________________________
>>
>>
>> --
>> Warm Regards,
>> Sourav
>>
>> ______________________________________________________________________
>> This communication contains information which may be confidential or
>> privileged. The information is intended solely for the use of the
>> individual or entity named above. If you are not the intended
>> recipient, be aware that any disclosure, copying, distribution or use
>> of the contents of this information is prohibited. If you have
>> received this communication in error, please notify me by telephone
>> immediately.
>> ______________________________________________________________________
>
>
> --
> Warm Regards,
> Sourav
--
Warm Regards,
Sourav
______________________________________________________________________
This communication contains information which may be confidential or privileged. The information is intended solely for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this communication in error, please notify me by telephone immediately.
______________________________________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.coova.org/pipermail/chilli/attachments/20131008/91b3843e/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: coovachiili session
Type: application/octet-stream
Size: 17869 bytes
Desc: not available
URL: <http://lists.coova.org/pipermail/chilli/attachments/20131008/91b3843e/attachment-0001.obj>
More information about the Chilli
mailing list