[Chilli] Problem upload data using latest coovachilli git
Antonio Silva
asilva at wirelessmundi.com
Tue Jul 8 09:02:48 UTC 2014
No, the cpu is idle.
My CPU is: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz
Thanks,
António
On Mon, 2014-07-07 at 18:02 -0700, Jed Gainer wrote:
> CPU getting maxed out?
>
>
>
> On Fri, Jun 27, 2014 at 6:19 AM, Mohsen Saeedi
> <mohsen.saeedi at gmail.com> wrote:
>
>
> On 06/27/2014 03:05 PM, Anonio Silva wrote:
>
>
> > Hi,
> >
> > With last git 9b7138f4d85a88e6e7e0b1cb5d3202d1a3bbad27, I've
> > a problem with data upload. The connection is very
> > inconstant going from 400Kbps to 0Kpbs, then to 50Kbps,
> > 150Kbps and sometimes it just freezes...
> >
> > My scenario is very simple:
> >
> > WAN --- Server running Chilli (eth1: e1000e: 100Mb/s) ------
> > PC (windows 7)
> >
> > Once the pc is authenticate (by MAC), i try to upload a file
> > to the ftp server running on the same server where the
> > chilli is running. It also happens if i upload data to WAN.
> > With the download there is no problem.
> >
> >
> > My configuration:
> >
> > chilli.conf
> > fg
> > debug
> > unixipc=chilli2.ipc
> > tundev=tuneth1
> > nasmac="portal2"
> > pidfile=/var/run/chilli/chilli2.pid
> > dhcpif=eth1
> > net=192.168.30.0/24
> > statip=192.168.30.0/24
> > dynip=192.168.30.0/24
> > dhcpstart=2
> > dhcpend=10
> > lease=1800
> > dns1=192.168.10.254
> > domain=local.local
> > radiusserver1=localhost
> > radiusserver2=localhost
> > radiusauthport=1812
> > radiusacctport=1813
> > radiussecret=secret
> > coaport=3771
> > uamlisten=192.168.30.1
> > uamserver=https://192.168.10.254
> > uamlogoutip=5.5.5.1
> > uamsecret=secret
> > uamport=3990
> > uamuiport=3992
> > macauth
> > strictmacauth
> >
> > i run it with:
> > /usr/sbin/chilli --conf chilli.conf
> > --pidfile /var/run/chilli/chilli.pid
> > --cmdsock /var/run/chilli/chilli.sock
> >
> > for iptables i have:
> > -A INPUT --in-interface eth1 -j DROP
> > -A FORWARD --in-interface eth1 -j DROP
> >
> >
> > If i drop the iptables rules that block the traffic on the
> > dhcpif the upload is fine. There is no radius attribute to
> > limit the speed.
> >
> > I'm running debian wheezy. I download the coova-chilli from
> > the git repos, and compile it using the debian package, in
> > the trunk directory i did dpkg-buildpackage. then i install
> > de coova-chilli.deb
> >
> > Can you help me to figure out where is the problem?
> >
> >
> > Thanks,
> > António
> >
> >
> >
> > LOG of chilli:
> >
> > main-opt.c: 453: 0 (Debug) IPv6 disabled
> > main-opt.c: 640: 0 (Debug) DHCP Listen: 192.168.30.1
> > main-opt.c: 641: 0 (Debug) UAM Listen: 192.168.30.1
> > garden.c: 439: 0 (Debug) Uamallowed IP address #0:1024:
> > proto=0 host=192.168.10.254 port=443
> > options.c: 446: 0 (Debug) PID 7669 saving options
> > to /var/run/chilli.7668.cfg.bin
> > options.c: 414: 0 (Debug) Loading modules
> > options.c: 658: 0 (Debug) PID 7668 reloaded binary options
> > file
> > chilli.c: 7270: 0 (Debug) clock realtime sec 1403863345 nsec
> > 332183759
> > chilli.c: 7275: 0 (Debug) clock monotonic sec 7232 nsec
> > 305988264
> > tun.c: 605: 0 (Debug) TX queue length set to 100
> > ippool.c: 338: 0 (Debug) Hashlog 9 264 512
> > net.c: 1279: 0 (Debug) Net SNDBUF 212992
> > net.c: 1282: 0 (Debug) Net RCVBUF 212992
> > net.c: 1337: 0 (Debug) device eth1 ifindex 4
> > net.c: 1353: 0 (Debug) lo address family: 17 (AF_PACKET)
> > net.c: 1353: 0 (Debug) eth3 address family: 17 (AF_PACKET)
> > net.c: 1353: 0 (Debug) eth0 address family: 17 (AF_PACKET)
> > net.c: 1353: 0 (Debug) eth1 address family: 17 (AF_PACKET)
> > net.c: 1353: 0 (Debug) lo address family: 2 (AF_INET)
> > net.c: 1353: 0 (Debug) eth0 address family: 2 (AF_INET)
> > net.c: 1353: 0 (Debug) eth1 address family: 2 (AF_INET)
> > net.c: 1353: 0 (Debug) tuneth3 address family: 2 (AF_INET)
> > net.c: 1353: 0 (Debug) tuneth1 address family: 2 (AF_INET)
> > dhcp.c: 481: 0 (Debug) hash table size 64 (56)
> > dhcp.c: 333: 0 (Debug) GARP: Replying to broadcast
> > dhcp.c: 1169: 0 (Debug) dhcpif (eth1) IPv6 address ::
> > radius.c: 1316: 0 (Debug) RADIUS client 0.0.0.0:3771
> > chilli.c: 7430: 0 (Debug) Waiting for client request...
> > net.c: 416: 0 (Debug) net select count: 1
> > net.c: 416: 0 (Debug) net select count: 2
> > net.c: 416: 0 (Debug) net select count: 3
> > net.c: 416: 0 (Debug) net select count: 4
> > net.c: 416: 0 (Debug) net select count: 5
> > net.c: 416: 0 (Debug) net select count: 6
> > net.c: 416: 0 (Debug) net select count: 7
> > rtmon.c: 465: 0 (Debug) i=0 sz=1
> > rtmon.c: 465: 0 (Debug) i=0 sz=2
> > rtmon.c: 465: 0 (Debug) i=1 sz=2
> > rtmon.c: 465: 0 (Debug) i=0 sz=3
> > rtmon.c: 465: 0 (Debug) i=1 sz=3
> > rtmon.c: 465: 0 (Debug) i=2 sz=3
> > rtmon.c: 465: 0 (Debug) i=0 sz=4
> > rtmon.c: 465: 0 (Debug) i=1 sz=4
> > rtmon.c: 465: 0 (Debug) i=2 sz=4
> > rtmon.c: 465: 0 (Debug) i=3 sz=4
> >
> > System Interfaces
> > 0) lo (1) ip=127.0.0.1 net=127.0.0.0 mask=255.0.0.0
> > mac=00-00-00-00-00-00 mtu=65536
> > 1) eth0 (3) ip=192.168.10.254 net=192.168.10.0
> > mask=255.255.255.0 bcase=192.168.10.255
> > mac=00-15-17-DA-4A-cd mtu=1500
> > 2) eth1 (4) ip=10.10.1.1 net=10.10.1.0 mask=255.255.255.0
> > bcase=10.10.1.255 mac=00-15-17-DA-4A-cc mtu=1500
> > 3) tuneth3 (26) ip=192.168.20.1 net=192.168.20.0
> > mask=255.255.255.0 peer=192.168.20.1 mac=00-00-00-00-00-00
> > mtu=1500
> > 4) tuneth1 (30) ip=192.168.30.1 net=192.168.30.0
> > mask=255.255.255.0 peer=192.168.30.1 mac=00-00-00-00-00-00
> > mtu=1500
> >
> > System Routes
> > 0) dst=10.10.1.0 mask=255.255.255.0 dev=eth1 (4)
> > 1) dst=192.168.10.0 mask=255.255.255.0 dev=eth0 (3)
> > 2) dst=192.168.20.0 mask=255.255.255.0 dev=tuneth3 (26)
> > 3) dst=192.168.30.0 mask=255.255.255.0 dev=tuneth1 (30)
> > net.c: 416: 0 (Debug) net select count: 8
> > net.c: 416: 0 (Debug) net select count: 9
> > radius.c: 1907: 0 (Debug) Received RADIUS packet id=0
> > radius.c: 427: 0 (Debug) RADIUS queue-out id=0 idx=0
> > dhcp.c: 3713: 0 (Debug) Address not found (192.168.30.2)
> > dhcp.c: 728: 0 (Debug) DHCP newconn: 68-B5-99-DB-72-AC
> > chilli.c: 5137: 0 (Debug) New DHCP request from
> > MAC=68-B5-99-DB-72-AC
> > chilli.c: 5140: 0 (Debug) New DHCP connection established
> > chilli.c: 5098: 0 (Debug) New Chilli Connection
> > chilli.c: 4896: 0 (Debug) ----> cb_dhcp_request <----
> > chilli.c: 4900: 0 (Debug) DHCP request for IP address
> > 192.168.30.2
> > chilli.c: 1542: 0 (Debug) Starting radius authentication
> > dhcp.c: 3965: 0 (Debug) dropping packet; ip not known:
> > 192.168.30.2
> > radius.c: 1907: 0 (Debug) Received RADIUS packet id=1
> > radius.c: 427: 0 (Debug) RADIUS queue-out id=1 idx=1
> > chilli.c: 4419: 0 (Debug) Received RADIUS response id=1
> > chilli.c: 4608: 0 (Debug) Received RADIUS Access-Accept
> > chilli.c: 865: 0 (Debug) newip 192.168.30.2
> > ippool.c: 456: 0 (Debug) Requesting new static ip:
> > 192.168.30.2
> > radius.c: 1907: 0 (Debug) Received RADIUS packet id=2
> > radius.c: 427: 0 (Debug) RADIUS queue-out id=2 idx=2
> > dhcp.c: 3785: 0 (Debug) ICMP frag forbidden for IP packet
> > with length 2560 > 1500
> > dhcp.c: 3785: 0 (Debug) ICMP frag forbidden for IP packet
> > with length 2560 > 1500
> > dhcp.c: 3785: 0 (Debug) ICMP frag forbidden for IP packet
> > with length 2560 > 1500
> > dhcp.c: 3785: 0 (Debug) ICMP frag forbidden for IP packet
> > with length 2560 > 1500
> > dhcp.c: 3785: 0 (Debug) ICMP frag forbidden for IP packet
> > with length 2560 > 1500
> > (... continues until the transfer is complete, when i remote
> > the firewall rule the ouput speed of this messages is
> > faster)
> >
> >
> >
> > _______________________________________________
> > Chilli mailing list
> > Chilli at coova.org
> > http://lists.coova.org/cgi-bin/mailman/listinfo/chilli
>
> Hi
>
> We have this problem too when we switch to 1.3 from 1.2.8. we
> test in any environment and the problem appears in any
> condition and any network infrastructure. The problem often
> occurs in high internet bandwidth. I think one man knows about
> this problem and David should be responsible about it.
> David we will appreciated if you survey code that have been
> added to latest version. 1.2.8 doesn't have any problem with
> data upload. The worst problem is when you're trying to upload
> attachment on Gmail.
>
> Best regards,
>
>
>
> _______________________________________________
> Chilli mailing list
> Chilli at coova.org
> http://lists.coova.org/cgi-bin/mailman/listinfo/chilli
>
>
>
>
>
> _______________________________________________
> Chilli mailing list
> Chilli at coova.org
> http://lists.coova.org/cgi-bin/mailman/listinfo/chilli
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.coova.org/pipermail/chilli/attachments/20140708/2d1a649c/attachment.html>
More information about the Chilli
mailing list