[Chilli] wispr upload limiting on coova 1.2.2

[David Bird]

Can you also give your iptables rules?


On Wed, 2010-03-03 at 12:31 +0200, Oguzhan Kayhan wrote:
> Hello,
> I am using coova on ethernet interfaces to control wireless devices behind 
> it..
> Previously i was using 1.0.14 and noticed that my upload speed config does not 
> work.
> So decided to update to 1.2.2
> But still no luck..
> I tried some parameters..
> For ex. I set upload to 5 mbit and download to 10mbit.
> xx-xx-xx-xx-xx x.x.x.x pass 4b8e16d90000000c 1 7798 6/0 6/0 2722/0 3236/0 0 0 
> 0/5000000 0/10000000
> 
> And while testing download works fine with 10mbit but upload was going up to 
> 100mbit..
> Anyway, i tested with 1mbit on both upload and download
> xx-xx-xx-xx-xx x.x.x.x pass 4b8e21260000000c 1 7798 48/0 1/0 4757101/0 
> 4755507/0 0 0 99/1000000 99/1000000 http:/xxx.xxx.xxx.xxx
> 
> while downloading it was 1mbit. but when uploading it stayed at 50mbit. maybe 
> because of my downloads saturation du e to ack packets..
> I assume that 99 on upload download is % size of saturation on that line.
> So..even i set very tiny numbers on upload and it reaches to %99.. no chance.. 
> it doesnt limit.
> I both used tun and tap as interface.. and i used both limiting from radius or 
> by coovas default upload limit parameters....same results..
> working on debian..
> 
> 
> PS: sorry for crosspost on both forum and maillist.
> But some users are making my network unstable due do high upload rates... so i 
> need that desperately..
> _______________________________________________
> Chilli mailing list
> Chilli at coova.org
> http://lists.coova.org/cgi-bin/mailman/listinfo/chilli