[Chilli] Router

[Charles Chambers]

Hi, all:

I am now at the point of implementation where I can hook up a laptop to 
eth1/HS_LAN on the CoovaChilli server and I get the captive portal 
page.  I'm obviously in the walled garden because it's asking for a 
username and password.  I'm trying to get a Netgear WGR614v5 router 
connected to HS_LAN/eth1.

I can connect the CoovaChilli server via eth1 to a switch port on the 
router with a crossover cable and I continue to get the walled garden 
login page.  For this, a laptop is connected with a straight through 
cable to a different switch port on the router.  It gets an IP of 
10.20.7.3, and I get the walled_garden login page.

I understand that turning off NAT turns the router into a switch.  I 
have a straight through cable connecting the router's WAN port to eth0, 
with NAT being disabled, and the laptop has an address of 10.20.7.4 as 
it is connected to a switch port.  i can also browse to 10.20.7.1/rd and 
access RadiusDesk, which is also installed and working properly (it asks 
for a username and password as well).

Connecting the router WAN port and turning off NAT works, but how do I 
continue to access the router for maintenance purposes (changing WPA 
password, for instance)?

Could someone  please enlighten me on why eth1 on the CoovaChilli server 
does not appear to have an IP address?

What is the opening page for the walled_garden found on the CoovaChilli 
server?

Is self-registration for basic (minimal) access to the Internet possible 
yet?

Is there a URL for configuring CoovaChilli, for example 
http://192.168.0.6:1447?